Sample resume skills for CCNA certified

• Installing, Configuring and Troubleshooting of Networking Equipments: Routers and Switches.
• Managing, Maintaining and Configuring an Internet work with the help of WAN technologies like PPP, Frame-relay, dedicated T1s, ISDN and Routing Protocols: OSPF, EIGRP, IGRP, RIP and RIPv2. Introductory knowledge of Layer-2 Switching, Vlan’s and Access-list.
• Basic knowledge of Multi-Protocol Label Switching (MPLS), Voice over IP (VoIP), Firewall PIX, Cisco Call Manager and routing protocol BGP
• Good understanding of OSI Model, TCP/IP protocol suite (IP, ARP, ICMP, TCP, UDP, SMTP, FTP, TFTP)
• Well understanding of Bridging and switching concepts and LAN technologies
• IP addressing and subnetting, Routing concepts
• Sound knowledge of routing protocols – RIP V1/V2, OSPF, IGRP and EIGRP
• Switches: Basic Configuration and VLAN setup on Cisco 1900, 2950, 2960 Switches.
• Router: Basic Configuration and monitoring of Cisco 2500, 2600, 1800
• Vlan: configuration, switching isl, dotlq
• Back-up and restore of all critical resources including router IOS, Outlook , System State data
• Good knowledge of wan solution, protocol HDLC,PPP,FRAME RELAY,ISDN
• Implemented SNMP on devices to allow for network management
• Implemented traffic filters using Standard and Extended access-lists, Distribute-Lists, and Route Maps.
• Implementation of HSRP, DHCP, DNS, FTP, TFTP, MRTG.
• Punch Blocks, Tone Tracers, Repeaters, T-BERD, Modems, CSU/DSU, Professional Modular Plug Crimper.
• Perform Troubleshooting end-to-end between the two sites
• Provide training to staff at the customer location
• Maintain documents of work perform during the day
• Configure and implement Remote Access Solution: VPN, ISDN dial up, Fractional T1
• Implement Cisco IOS Firewall IDS using 2600 series router
• Configure Cisco VPN 3000 Concentrator to allow VPN clients
• Redistribution of routing protocols and Frame-Relay configuration
• Network Migration from RIP to OSPF
• Build and maintain Visio documentations for Clients
• Troubleshoot OC-3, DS3, DS1, and ISDN connectivity issues
• Negotiate service contract with circuit carriers
• Configure Extreme Black Diamond Switches (layer 2, 3 and 4 switching)
• Design and implement security policies using ACL, PIX firewall (515, 520)and
• Provide intranet VPN solution using Cisco 2621 and IPSec Tunneling
• Upgrade Cisco Routers, Switches and Firewall (PIX) IOS using TFTP
• Configure Terminal Servers for out-of-band management
• Configure Traffic Shaping to optimize utilization on ATM Backbone
• Build and maintain Visio documentation database of network topology
• Help establish guidelines and standards for Change Procedures
• Configured Cisco Routers (2500, 3000, 4000) using RIP, IGRP, OSPF, EIGRP
• Configure Cisco Switches (5000, 3524, and 2900)
• Designed and implemented remote dial up solution for clients
• LAN/WAN design and implementation using Cisco routers, hubs and switches
• Securing network resources with shared folder permissions, Implementing file security system.